3-5L/Hr Centrifugal Spray Dryer Antibiotics Medicinal Excipients Donkey Hide Gelatin Powder

• Customization: Available
• After-sales Service: Provide
• Warranty: 2 Years
• Model NO.: LPG-5
• Heating Mode: Dielectric
• Material Status: Powder
• Atomization: Pressure Atomization
• Flow: Parallel Flow
• Heat Source: Electricity, Steam, Coal Gas
• Type: Pressure Spray
• Power Supply: 380V 50Hz
• Keywords: Spray Dry
• Function: Centrifugal Atomization Drying
• Application Material: Chemical Industry Plastic Resin Food Industry Food
• Capacity: 3-5L/Hr
• Temperature Range: 180-350ºC
• Advantage: Dry Into Powder Products Once
• Heating Source: Electricity
• Model: LPG-5
• Transport Package: Export Standard Wooden Box
• Specification: 5L
• Trademark: JASTEC
• Origin: China

Product Description

Product Description

Centrifugal Spray Dryer and spray drying tower are widely used processes in liquid forming process and drying industry. They are suitable for producing powdered solid products from suspension emulsion, solution, emulsion and paste liquid raw materials. Therefore, when the powder size distribution, residual moisture content, bulk density and powder shape of the finished product meet the standards, the spray dryer is an ideal drying process.

 

Key points of spray drying process:

1. Contact between hot air flow and droplets: When there is a sufficient amount of hot air flow entering the spray drying chamber, the direction and angle of the hot air flow must be considered, whether it is parallel flow, countercurrent flow or mixed flow, to ensure sufficient contact with the droplets, so as to achieve sufficient heat exchange.

2. Atomization: The atomization system of the spray dryer must ensure that the droplet size is evenly distributed, which is crucial. Because this can ensure the qualified rate of product quality.

3. Design of pipe angle and cone angle: We have obtained some experience data from the production of nearly a thousand spray drying units, which can be shared with you.

Working Principle

Left picture description:

1. Air filter          2. Heater            3. Hot air distributor                   4. Drying chamber              5. Filter chamber
6. Pump            7. Nozzle             8. Cyclone separator                 9. Fan                                10. Liquid tank

Working principle

The spray dryer is an open cycle, parallel flow, centrifugal atomization machine. The drying medium air is filtered by the primary and medium efficiency air filters, and then sucked by the blower according to the operating instructions, and then heated by the heater and passed through the hot air distributor of the filter into the spray drying main tower. The liquid material passes through the peristaltic pump according to the operating instructions, enters the high-speed rotating centrifugal nozzle, and is dispersed into small droplets under the action of centrifugal force. In the spray drying main tower, the small droplets are fully in contact with the hot air, and after heat exchange along its specific path, they are dried into products, and then separated by the cyclone separator, the solid materials are collected, and the gas medium is discharged after filtering. The entire spray system is easy to clean, has no dead corners, and meets GMP requirements.

Product Parameters

Model	LG-
	5	25	50	150	300~5000
Inlet temperature (ºC)	180-350
Outlet temperature (ºC)	80-130
Maximum evaporation of water (kg)	5	25	50	150	300~5000
Centrifugal spray head transmission type	Compressed air transmission		Mechanical transmission
Speed (r/min)	25000	22000	18000	18000	15000
Spray disc diameter (mm)	50	102	108	150	108-340
Heat source	Electricity	Electricity	Electricity + steam, oil, gas	Electricity + steam, oil, gas	Solved by the user
Maximum power of electric heating (kw)	8	31.5	60	99

Note: The above parameters are only for standard models. Our company can customize products according to customers' actual needs.

Application Fields

Chemical industry:	Sodium (potassium) fluoride, alkaline dye pigments, dye intermediates, compound fertilizers, formaldehyde silicate, catalysts, sulfuric acid agents, amino acids, white carbon black, etc.
Plastic resin:	AB, ABS emulsion, urea-formaldehyde resin, phenolic resin, dense glue (urea) formaldehyde resin, polyethylene, polyvinyl chloride, etc.
Food industry:	Fat-enriched milk powder, galactose, cocoa milk powder, milk substitute, egg white (egg yolk).
Food and plant juice:	Oats, chicken juice, coffee, instant tea, spices, meat, protein, soybeans, peanut protein, hydrolyzate, etc.
Sugar:	Corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramics:	Alumina, tile materials, magnesium oxide, talc, etc.

Detailed Photos

Features

1. The spray drying speed is fast. After the liquid is atomized, the surface area is greatly increased. In the process of contacting with hot air, 95%-98% of the water can be evaporated instantly. The drying time only takes a few seconds, which is very suitable for drying heat-sensitive materials.
2. The product has good uniformity, fluidity and solubility. The higher the purity of the product, the better the quality.
3. The production process of the spray dryer is simplified and the operation and control are convenient. For liquids with a moisture content of 40-60% (liquid materials can reach 90%), it can be dried into powder products at one time. After drying, there is no need for crushing and screening, which reduces the production process and improves the purity of the product. The particle size, bulk density and moisture of the product can be adjusted within a certain range by changing the operating conditions, which is very convenient for control and management.

Our Workshop

Company Profile

Jastec(Shanghai) Technology Co., Ltd

Jastec(Shanghai) Technology Co., Ltd is a professional supplier of food deep processing (include food additive) machinery. It integrates develop, sales, after-sale services as a whole, being a professional supplier for extraction equipment, drying equipment, mixing equipment, grinding equipment and turnkey project for food(include food additive)and agriculture industry etc.
Jastec has passed the Occupational health and Safety Management System Conforms to the standard CE,SGS. As the members of China National Standardization technique Committee for Industrial Equipment,testified by experience of long-term users, our machine and production line have very high stability and reliability, which have been sold to more than 160 foreign countries like Asian, African,European, American. Jastec have established branch offices and showrooms in Europe and North America.
For many years, we`re stick to the principle of "Customers First" taken the initiative to manage customers` demands, to develop and research high-quality, low energy cost but efficiency equipment, set up a perfect after-sale service system, and brought up the concept of" Star service" The Jastec equipment is worth of your trust, Let`s join hands to co-develop a brilliant future in the 21st century full of opportunities! Brand from concentration--Our pursuit is to supply the best cost-effective machines in the world. In this 21-century full of opportunities and challenges, Jastec will provide new equipment and more pragmatic spirit of innovation, cooperate with you and create brilliance!

Exhibition

WHY CHOOSE US?

In order to give you a better quotation, please tell us the following related questions. If you are not sure about the answers to these questions, please feel free to consult us. We have mature experience in spray drying production process and hope to give you some practical suggestions.
 

1. What is your raw material?
2. How many kg/h of liquid input?
3. How many kg/h of finished product production capacity?
4. Heating method: electricity, gas or steam?
5. What is the maximum temperature that the material can withstand?
6. What is the air inlet temperature? What is the air outlet temperature?
7. What is the initial moisture content before drying?
8. What is the moisture content of the final product after drying?
9. What is the solid content?
10. Is the material corrosive? If the material is corrosive, use stainless steel