Fully automatic multifunctional tablet and capsule counting production line
The bottled assembly line consists of the following single machines: high-speed automatic bottle unscrambler (PBL-160) + bottle unscrambler plate + visual imaging capsule counter (PBDS-8) + high-speed rubbing capping machine (PBX-160)(including belt capping) + turntable bottle unscrambler (PBL-Z φ850mm) + high-frequency aluminum foil sealing machine (PBFK-260air-cooled)
Medium speed line
JF-A160-16 counting bottling packaging linkage production line consists of JF-A160 bottle opener, JF-16 electronic counting machine, JF-C120 automatic desiccant inserter (cotton inserter or paper inserter), JF-D902 capping machine, JF-2 induction sealing machine, JF-201 round bottle side packing machine (coding machine).
1. Wide applicability, with our original dust-proof technology, it can be used for tablets (including abnormal tablets), capsules, gels (including abnormal gels, transparent gels and opaque gels) pearls.
2. High intelligence: Intelligent design of each machine with interactive operation multi-language panel. It can save 10~20 different operating parameters and is easy to load for different products. Self-diagnosis, display errors and sound alarms. Good cooperation between each machine and the entire production line.
3. High efficiency. Take targeted operations, easy to operate, adjust, clean and maintain. Low working cost and low maintenance cost. 3 workers will be enough to operate.
4. Small size (innerpackingroom30m2 max) and low cost electricity.
5. Control system: adopt PLC and touch screen control.
Visual imaging counting machine
1. Working Principle
The drugs in the silo are transported to the entrance of the inspection channel evenly and orderly (without drug overlap) through the three-level vibration feeding system, counted through visual imaging detection, and loaded into bottles according to the set filling quantity through the channel small gate cutting and the middle pre-storage gate, and then switched to the next process through the bottle changing device.
2. Performance characteristics
(1) The PBDS-8 visual imaging electronic counting machine is an automated equipment integrating machine, electricity and pneumatics. It adopts a linear array CCD camera and a high-speed ARM processor, and the pneumatic components adopt Japanese SMC and American MAC high-speed solenoid valves.
(2) The CCD counting machine has an average of about 250 imaging points at each channel detection point, which is equivalent to a detection accuracy of 0.12mm, which can fully meet the counting speed of 20-60 bottles per minute. The operating system adopts embedded configuration software to provide customers with a beautiful and friendly human-computer dialogue window, which can be called a fool-proof operating system. It greatly shortens the time for customers to get familiar with the equipment, enables customers to quickly master the use of the equipment, and maximizes the customer's production efficiency.
(3) The PBDS-8 visual imaging electronic tablet counting machine is equipped with a three-level vibration device; the vibration machine adopts the principle of electromagnetic vibration, and its mechanical structure and electromagnetic coil indicators adopt foreign advanced technology; the vibration control system adopts closed-loop control technology, and the vibration frequency is monitored in real time through the vibration sensor. The controller automatically adjusts the output frequency according to the monitoring frequency. It has stable vibration, low noise, and stable transportation of medicine tablets. The three-level vibration design can better open the distance between medicine tablets, eliminate the phenomenon of overlapping medicines, and ensure the accuracy of counting.
(4) PBDS-8 visual imaging electronic tablet counting machine imaging detection The overall self-designed tablet counting device has the characteristics of high sensitivity, high response speed, high dust resistance, detection, stable output signal, and zero error in counting. Special design is made for the phenomenon of high dust in the manufacturer: the device is equipped with a high-pressure dust removal function, and the user can set the dust removal interval time according to the size of the dust, so as to ensure that the user can continue to produce without stopping and improve production efficiency to the greatest extent.
(5) The PBDS-8 visual imaging electronic tablet counter is equipped with a combined small gate cutting device, which adopts an integrated structural design (patented), and the accessories are imported high-speed solenoid valves from the United States and Japanese SMC cylinders; the cylinder and solenoid valve adopt a unique connection block designed independently (other manufacturers mostly use ordinary PU air pipe connections), which eliminates air leakage, shortens the distance of the air path to the greatest extent, and improves the response speed of the cylinder to ensure the accuracy of tablet cutting.
(6) The unique layout process of the PBDS-8 visual imaging electronic tablet counter: the integrated photoelectric tablet counting device and the vibration feeding system adopt a unique tilt angle layout, the purpose of which is to better cater to the parabola of the falling medicine and make the tablet detection more accurate; the tilt angle of the small gate of the channel can make the cutting more accurate. Avoid the phenomenon of one less in the previous bottle and one more in the next bottle.
(7) The PBDS-8 visual imaging electronic tablet counter is equipped with an automatic constant pressure system for power supply and compressed air pressure detection to prevent the normal operation of the equipment from being affected by the unstable power supply voltage of the customer unit; the pressure detection can automatically alarm and shut down the equipment when the intake pressure is too low.
(8) The PBDS-8 visual imaging electronic counting machine is equipped with photoelectric detection function at the inlet and outlet, which mainly detects whether there are bottles in front and whether there is a bottle blockage in the back. If there is no bottle or the bottle is blocked, the equipment will automatically stop, otherwise the equipment will automatically start working, which meets the automatic linkage function of the entire production line. It is also equipped with a dust suction device and a recovery tank to avoid the scattering of drugs when pouring bottles and the impact on subsequent equipment production, and improve the recycling rate of drugs; the machine body is made of high-quality 304 stainless steel material, fully sealed structure, in line with GMP requirements.
Technical Parameters
| NO. |
Item |
Parameters |
| 1 |
Production capacity |
20-60 bottles/minute (depending on the contents and particle size) |
| 2 |
Counting accuracy |
99.99% |
| 3 |
Number per bottle |
1-9999 can be set arbitrarily |
| 4 |
Applicable range of medicines |
Tablets: maximum φ22mm; capsules #00-#5 |
| 5 |
Applicable bottle mouth size |
Φ20~100mm |
| 6 |
Bottle specifications |
15-300ml |
| 7 |
Maximum container height |
H220mm |
| 8 |
Power supply specifications |
220V AC, 50/60 Hz |
| 9 |
Power consumption |
1.0KW |
| 10 |
Gas consumption (m3/h) |
0.8 |
| 11 |
Air pressure (mpa) |
0.5 |
| 12 |
Storage tank volume |
30 L |
| 13 |
Weight |
450kg |
| 14 |
(External dimensions (mm) (length × width × height) |
1600×1800×1600 |
High frequency aluminum foil sealing machine (air cooling)
Performance characteristics
(1) The machine adopts the domestic advanced inverter theory and closed backfeed main circuit, the unique structure of the tunnel-type induction head, and the modular control of the electrical appliances, which makes the equipment more stable and the sealing more airtight.
(2) The host generator adopts the latest imported transistors from Japan, CPU module control, and adjustable power.
(3) This machine is suitable for aluminum foil sealing of bottle caps of various round bottles and some special-shaped bottles, and the aluminum foil sealing yield rate reaches 100%.
(4) The body is made of high-quality 304 stainless steel material, with beautiful appearance and in line with GMP requirements.
(5) The equipment is simple to operate and easy to maintain, and is the first choice of most users.
Technical Parameters
| NO. |
Item |
Parameters |
| 1 |
Production capacity |
20-260 bottles/min (depending on the packaging) |
| 2 |
Bottle specifications (ml) |
15-300 ml |
| 3 |
Voltage (V)/Frequency (Hz) |
220V AC, 50/60HZ |
| 4 |
Total power (KW) |
2.0 |
| 5 |
Air pressure (Mpa) Air consumption (m3/h) |
0.5/0.1 |
| 6 |
Dimensions (length × width × height) |
1600×880×1280 mm |
| 7 |
Net weight (kg) |
150kg |
Desiccant filling machine
Performance characteristics
It is used to fill a single package of desiccant into a container to prevent tablets or capsules from getting wet. The desiccant belt is fed into the cutting area by a slide rail. Two blades cut off the single package of desiccant on the desiccant belt, and the desiccant belt falls accurately into the container.
The machine is designed strictly in accordance with the pharmaceutical GMP standards and process requirements. The whole machine is easy to operate, equipped with an automatic shutdown system for lack of bottles and bottle jams, and can automatically feed bottles. In addition, the machine is suitable for bottles of different sizes and shapes, and no spare parts need to be replaced.
Technical Parameters
| NO. |
Name |
Specification |
| 1 |
Output |
20- 160bottles/min |
| 2 |
Bottle Size |
15-300ml |
| 3 |
Desiccant sachet size |
15-30mm *40-60 mm |
| 4 |
Voltage |
220V 50/60Hz Single-phase |
| 5 |
Power |
0.3 KW |
| 6 |
Air Consumption |
0.5 Mpa / 0.3m3/h |
| 7 |
Dimension ( L×W×H) |
1600×750×1800mm |
| 8 |
Weight |
300kg |
Self-adhesive labeling machine
Performance characteristics
The working procedure of PBTB-160 Self-adhesive Labeler is : printing the codes by the print system and Removing the unit label from the label ribbon and and labeling on the bottle smoothly and accurately by the Roller .It designed strictly according to pharmaceutical GMP standard and technological requirements .The whole machine's running is quite simple and equips with the automatic stop system for absent and choked bottles ,automatic running with bottle feed-in .Especially it adopts the Frequency Conversion Technology to control the electrical system which makes the user set the output freely and provides the convenience in whole production procedure .
Technical Parameters
| Model |
PBTB-160 |
| OUTPUT |
20-160 Bottles/min |
| Size of Container |
15-300 ML |
| Size of Label |
Length 10-240 mm Width 25-100 mm |
| Voltage |
AC220V / 50HZ |
| Power |
1.5KW |
| Overall Dimension |
(L) 2000 × (W) 1150 × (H) 1650mm |
| Weight |
250KG |
HIGH-SPEED CAPPING MACHINE
Performance characteristics
The bottle body is clamped by two synchronous belts, and four sets of highly elastic and wear-resistant rubber wheels drive the bottle cap to rotate to achieve the purpose of capping. This machine is a highly efficient, widely applicable, easy to operate, stable in operation, easy to clean, convenient to maintain, and durable equipment. The PBX-160 high-speed capping machine is mainly suitable for the pharmaceutical, industrial, chemical, food and other industries. It is a special equipment for automatic capping of plastic bottles and glass bottles. It greatly improves labor productivity and avoids the human pollution caused by manual capping in the past. The machine can be used independently or with other supporting equipment such as bottle unscrambler, tablet counting machine, sealing and labeling machine to form a linkage production line.
Technical Parameters
| No. |
Item |
Parameter |
| 1 |
Production capacity |
20-160 bottles/minute (depending on the bottle and cap) |
| 2 |
Bottle specifications |
15-300 ml |
| 3 |
Bottle cap diameter |
19-65 mm |
| 4 |
Bottle body diameter |
23-100 mm |
| 5 |
Bottle height |
45-210 mm |
| 6 |
Voltage/frequency |
220 V AC, 50/60 Hz |
| 7 |
Power |
2.5 KW |
| 8 |
Dimensions (length × width × height) |
2600 × 1100 × 2000 mm |
| 9 |
Weight |
580 kg |
High speed automatic bottle unscrambler
1. Working Principle
The bottle clamping mechanism clamps the bottle from the previous process and then transports it to the bottle capping station. Then each bottle is automatically covered with a bottle cap and brought to the capping wheel station. The bottle cap is tightened by 4 sets of capping wheels.
2. Performance characteristics
(1) The PBX-160 high-speed rubbing capping machine is an automated equipment that integrates machinery, electricity and gas. It adopts a full set of high-end PLC, human-machine interface, inverter speed control electrical system, servo motor, etc. imported from Schneider, France.
(2) The human-machine dialogue window of the machine is friendly, simple and easy to understand; parameter adjustment is saved in real time and will never be lost; the equipment runs stably and reliably; the structure is simple and reasonable, and maintenance and debugging are convenient.
(3) The PBX-160 high-speed rubbing capping machine is equipped with an automatic safety protection device photoelectric monitoring. It automatically starts when the cap is clamped or full, and automatically stops when the cap is missing; the cap that is not tightened or tilted is automatically rejected. It has a high degree of automation, stable operation, low noise; it is easy to operate, easy to maintain, and has strong applicability.
(4) This machine adopts a step-by-step lifting and sorting method for caps, which has good stability. If the cap is not in place, it will automatically fall back to the cap storage hopper. The large capacity of the cap storage hopper reduces the frequent capping and reduces the labor intensity of the operator.
(5) The capping wheel is made of a new silicone material, which makes the capping wheel fit better with the bottle cap, the capping effect is better, and the capping wheel is wear-resistant and has a long service life. The bottle separation wheel uses a new silicone wheel to replace the previous O-ring, which is stable and not easy to fall off.
(6) The machine body is made of high-quality 304 stainless steel material and has a fully sealed structure. It meets GMP requirements.
Technical Parameters
| Equipment name |
Model |
Dimensions (mm) |
weight(kg) |
Applicable bottle specifications (ml) |
Production volume
(bottles/min) |
power supply |
| Turntable bottle unscrambler |
PBL-Z |
950×850×1100 |
100 |
15-300 |
20-60 |
220VAC ,50/60HZ |
Electrical cabinet display
Jastec(Shanghai) Technology Co., Ltd
Jastec(Shanghai) Technology Co., Ltd is a professional supplier of food deep processing (include food additive) machinery. It integrates develop, sales, after-sale services as a whole, being a professional supplier for extraction equipment, drying equipment, mixing equipment, grinding equipment and turnkey project for food(include food additive)and agriculture industry etc. Jastec has passed the Occupational health and Safety Management System Conforms to the standard CE,SGS etc. As the members of China National Standardization technique Committee for Industrial Equipment,testified by experience of long-term users, our machine and production line have very high stability and reliability, which have been sold to more than 160 foreign countries like Asian, African,European, American. Jastec have established branch offices and showrooms in Europe and North America. For many years, we`re stick to the principle of "Customers First" taken the initiative to manage customers` demands, to develop and research high-quality, low energy cost but efficiency equipment, set up a perfect after-sale service system, and brought up the concept of" Star service" The Jastec equipment is worth of your trust, Let`s join hands to co-develop a brilliant future in the 21st century full of opportunities! Brand from concentration--Our pursuit is to supply the best cost-effective machines in the world. In this 21-century full of opportunities and challenges, Jastec will provide new equipment and more pragmatic spirit of innovation, cooperate with you and create brilliance!
Our Services
Pre-sale service
1.Support product customization, we can make special customization according to your needs.
2. Before delivery, we will test the machine to ensure that it can run normally.
3.Provide business consultation and technical support, and provide free professional packaging solutions.
4. Make machine layout for customers according to their factories.
After-sales service
1.Machine operation manual.
2.Provide installation, debugging, setting, commissioning,maintenance and other videos.
3.Online communication or video communication is possible.
4.We have professional overseas service engineers at your service at any time. Air tickets, visas, transportation, living and food are all customers' business.
5.During the warranty period, there is no man-made damage,we will replace it for you.
Export wooden pallets In order to better ensure the safety of your goods, we will provide professional, environmentally friendly, convenient and efficient packaging services.
1. What are the main components of the counting line equipment?
The counting production line usually includes the following equipment:
Electronic counting machine: used to accurately count solid particles such as tablets, capsules, and pills.
Bottle unscrambler: automatically organizes medicine bottles to ensure that the bottle mouths are aligned for easy filling.
Capping machine: seals the bottle caps after filling.
These equipment meet GMP production requirements and are suitable for industries such as pharmaceuticals and health products.
2. What is the counting accuracy of the electronic counting machine?
Our electronic counting machine uses a high-precision optical detection system with an accuracy of more than 99.5%, and has the ability to resist dust interference to ensure stable operation.
3. What types of drugs or particles are suitable for the equipment?
Tablets (including special-shaped tablets)
Capsules (transparent/opaque)
Soft capsules
Pills
The equipment supports fast switching of different specifications, easy adjustment, and no need to replace the structure.
4. What intelligent functions does the equipment have?
No bottle, no counting: automatically stops working when no bottle is detected.
Fault self-check: Automatic alarm and removal of problematic medicine bottles in abnormal situations (such as blockage and broken particles).
Touch screen control: Multiple sets of parameters can be stored, easy to operate.
5. What is the production efficiency of the equipment?
The production speed of the standard model can reach 25 cans/minute (depending on the particle size and bottle type).
Vibration unloading and flip-plate packaging mechanism are used to ensure uniform discharge without damaging the medicine.
6. What is the material and durability of the equipment?
Mainly made of stainless steel + aluminum alloy, the structure is stable and meets hygiene standards.
Core components (such as photoelectric sensors and control chips) are imported or high-quality components from Fujian and Taiwan to ensure long-term stable operation.
7. How to change varieties or clean equipment?
Modular design is adopted, and disassembly and clearing does not require tools, which is convenient and fast.
Provide technical training to ensure that customers can operate and maintain efficiently.
8. How is the after-sales service?
Provide free installation and commissioning and operation training.
With sufficient spare parts inventory, we can respond quickly to maintenance needs.
Support software upgrade and system optimization
Audited Supplier 
Medium speed line
){kind=link}